- Hign-concerned Chemical: None
- Antenna Type: External
- Decode Ability: 1080P (Full-HD)
- Connectors: HDMI-compatible
- Operation System: Android
- Model Number: CM506/50633A
- Recording: No
- Brand Name: UGREEN
- Origin: Mainland China
- Item Type: TV stick
- Certification: CE,FCC,RoHS
- Remote Control: Not Included
- Product Name: Wireless HDMI Extender
- Function 1: Wireless Video Transmitter
- Function 2: Wireless Video Receiver
- Function 3: HDMI & VGA
- Two Model: Mirror & Extend Mode
- Feature 1: 1080P Full HD
- Output Devices: Laptop/PC/PS5/Switch…
- Input Devices: Projector/Monitor/TV…
- Transmission distance: 50 Meters
UGREEN
◎ Brand Newest Release
◀◀ Wireless HDMI Extender▶▶
50M Transmit
———————————————————————————————————————————————————
HDMI Wireless Extender
50m HDMI-Transmit✔
HDMI & VGA-Receive✔
5GHz Wireless✔
Connect Your Computer to Display
HDMI & VGA ports ensure a widely compatibility
Point to Point Connection
More convenient to use
50 Meters
Long Distance Transmission
With 2 external high- performance antennas
5GHz Wireless Transmission
Ensure smooth and lag-free screen transfer
Multi-interface Design
✔HDMI & VGA dual video interface
✔3.5mm audio interface, support external audio devices
2 Display Modes Available
✔Mirror Mode: Show the same pictures on a big screen
✔Extended Mode: Show different pictures, working & entertainment at the same time
Plug & Play
✔Driver-free✔No network Needed✔No software Needed
Wide Compatibility
Powerful Chipset
Using high-performance digital chip
One-Click Disconnect | Connect
Support automatic reconnection
USB-C Power Supply Port
Making transmission more stable
*Note: Please provide power supply when you use it. Otherwise, unstable transmission may occur.
All in One
Multiple interfaces meet your needs
1080P HD Quality
Offer a true-to-life picture quality
More Details
✔Hollow design, fast heat dissipation
✔Silicone base, stable and non-slip
✔Alloy material, strong and durable
Connection Steps
Product Specification
Brand Name: |
UGREEN |
Product Name: |
Wireless Extender |
Model No.: |
CM506 |
Transfer Method: |
5GHz Extender |
HDMI Resolution: |
1080P@60Hz, backward compatible with 720P@60Hz |
VGA Resolution: |
1080P@60Hz, backward compatible with 720P@60Hz |
Transmission: |
50 Meter Wireless |
Power Supply Port: |
USB-C |
Material: |
Aluminum Alloy + ABS |
Package: |
UGREEN Retail Box |
|
|
|
Package List
People Ask
Q1: Does this product support HDCP?
A1: Yes, it support HDCP1.4.
Q2: The transmission protocol of this product is?
A2: dopt wireless 5GHz wireless transmission.
Q3: Is the output image of the extender point-to-point or compressed?
A3: In the middle of product transmission is codec, RX output is compressed image output.
Q4: Is there any delay after the video is transmitted through the wireless extender?
A4: About 140ms.
Q5: Does the product support display EDID reading (transparent transmission)?
A5: Use built-in fixed EDID.
Q6: The product cannot be paired successfully?
A6: After the product TX and RX terminals are powered on again, you can press and hold the reset button, wait for the indicator light to go off and then release, the product will enter automatic pairing (the product will have no signal output on the RX terminal and there will be a factory reset instruction on the screen).
Q7: How to check the product if the video doesn’t appear?
A7: Follow the below steps please.
1) Check whether the product is powered on. Try to use standard power as the power source. If the power supply is insufficient, it will fail to connect. When the power is turned on, the power indicator of the product is always white.
2) After the product is received, check the status of the TX and RX to see if the pairing is successful. When there is no pairing, the TX end indicator will flash;
3) Reduce the output resolution and refresh rate of the device, and investigate the signal attenuation caused by poor wire material;
4) When there is no signal output from the VGA port, you can connect the display device to the HDMI output port on the RX to check whether the signal is displayed normally;
5) The distance between TX and RX can be shortened (open and unobstructed) for testing, whether there is strong electromagnetic interference in the space.
6) If possible, it is recommended to replace other equipment and try it.
Reviews
There are no reviews yet.